Power point installation Australia usually costs more when new wiring, brick walls, outdoor outlets, USB points, or switchboard work is needed. Simple installations near existing wiring may cost less, while complex jobs need a proper quote from a licensed electrician.
Extra power points are one of the most practical electrical upgrades for Australian homes. They help reduce overloaded power boards, messy extension leads, and unsafe plug stacking.
Whether you are setting up a home office, upgrading a kitchen, adding bedside charging, or improving an outdoor entertaining area, the right power point location can make daily life much easier.
Average Power Point Installation Australia Cost In 2026
The cost of power point installation Australia depends on the type of outlet, wall material, access, wiring distance, and whether the circuit can safely handle the extra load.
Current Australian cost guides suggest electrician hourly rates can range from around $80 to $130 per hour, while outlet costs may vary depending on whether you choose single, double, weatherproof, or USB power points.
Another 2026 Australian guide places typical new power point installation around $140 to $180 including labour and materials, with higher costs possible for harder installations such as brick walls.
These figures are only general guides. A proper quote is always best because two homes can have very different wiring conditions.
What Affects The Final Price?
Several factors can change the price of power point installation Australia.
The biggest cost drivers include:
- Distance From Existing Wiring
A nearby existing circuit may make the job simpler. A new cable run from the switchboard will usually cost more. - Wall Type
Plasterboard is often easier to work with than brick, concrete, or tiled splashbacks. - Power Point Type
Standard double outlets are usually cheaper than USB, smart, weatherproof, or heavy-duty outlets. - Indoor Or Outdoor Location
Outdoor power points need suitable weatherproof fittings and careful placement. - Switchboard Capacity
If your board is already full or outdated, extra work may be needed before adding new outlets. - Access Under Floors Or In Roof Spaces
Easy access can reduce labour time. Tight roof spaces, concrete slabs, or multi-storey homes can increase complexity.
Why Cheap Installation Is Not Always Better
A low price can look appealing, but electrical work needs to be safe, compliant, and properly tested.
Power points are connected to fixed wiring. Poor installation can create loose connections, overheating, nuisance tripping, damaged appliances, or shock risks.
The Australian Wiring Rules, AS/NZS 3000:2018, set out technical requirements used by electricians for the design, construction, and verification of electrical installations.
Queensland electrical safety guidance also reminds homeowners not to do their own electrical work and states that electrical work must be performed by a person with the correct electrical work licence.
Common Places To Add Power Points
Many Australian homes were not designed for today’s device-heavy lifestyle. Older rooms may only have one or two outlets, which can quickly become frustrating.
Popular locations include:
- Kitchen benches for appliances.
- Home office walls for computers and monitors.
- Bedrooms for lamps and chargers.
- Living rooms for TVs and entertainment units.
- Garages for tools and battery chargers.
- Outdoor areas for fridges, lighting, or garden equipment.
- Laundries for washers, dryers, and cleaning appliances.
A licensed electrician can help place outlets where they are useful without overloading circuits.
Indoor, Outdoor, USB, And Smart Power Points
Not every power point is the same.
A standard double outlet suits many bedrooms, living areas, and home offices. USB outlets can reduce charger clutter, especially near bedsides or study desks. Weatherproof outlets are designed for suitable outdoor use when installed correctly.
Smart power points may suit homes where you want timer control, remote switching, or energy monitoring. However, they still need safe installation and must match your electrical setup.
When planning power point installation Australia, think about how you use the room now and how you may use it in the future. It is often more efficient to install several outlets during one visit than to book separate jobs later.
Can You Install A Power Point Yourself?
No. You should not install, move, or wire a power point yourself unless you are properly licensed.
You can safely decide where you want the outlet, clear furniture from the area, and choose the type of power point you prefer. The wiring, connection, testing, and certification should be handled by a licensed electrician.
This protects your home, your insurance position, and anyone who uses the outlet after installation.
When To Call A Professional
Call a licensed electrician if you need a new power point, want to move an existing one, notice a loose outlet, see burn marks, hear crackling, or feel heat around the socket.
You should also call a professional if you are relying on power boards every day. That can be a sign your home does not have enough fixed outlets for your actual needs.
Goldworks Electrical can assess your wiring, check switchboard capacity, and provide clear advice on power point installation Australia for your home or business.
Conclusion
The cost of a new power point depends on location, wall type, outlet style, wiring access, and circuit condition. Simple jobs may be relatively straightforward, while outdoor outlets, brick walls, and new cable runs can cost more.
Safe power point installation Australia should always be completed by a licensed electrician. For practical advice and neat, compliant installation, contact Goldworks Electrical and plan your next electrical upgrade with confidence.
FAQs
How Much Does A Standard Power Point Cost To Install?
Many standard installations fall around the lower to mid hundreds, but the final price depends on access, wiring, and outlet type.
Are USB Power Points Worth It?
They can be useful in bedrooms, kitchens, and offices where phones, tablets, and devices are charged often.
Can I Replace A Power Point Cover Myself?
You should avoid any work involving electrical parts or wiring. Ask a licensed electrician if the outlet is damaged, loose, or outdated.
Do Outdoor Power Points Cost More?
Often, yes. Outdoor outlets need suitable weatherproof fittings and safe positioning, which can increase labour and material costs
